$0.00
Cisco 300-710 Exam Dumps
Securing Networks with Cisco Firepower (300-710 SNCF)
Total Questions : 260
Update Date : April 16, 2024
PDF + Test Engine
$65 $95
Test Engine
$55 $85
PDF Only
$45 $75
Money back Guarantee
When it comes about your bright future with career Examforsure takes it really serious as you do and for any valid reason that our provided Cisco 300-710 exam dumps haven't been helpful to you as, what we promise, you got full option to feel free claiming for refund.
100% Real Questions
Examforsure does verify that provided Cisco 300-710 question and answers PDFs are summed with 100% real question from a recent version of exam which you are about to perform in. So we are sure with our wide library of exam study materials such Cisco exam and more.
Security & Privacy
Free downloadable Cisco 300-710 Demos are available for you to download and verify that what you would be getting from Examforsure. We have millions of visitor who had simply gone on with this process to buy Cisco 300-710 exam dumps right after checking out our free demos.
300-710 Exam Dumps
What makes Examforsure your best choice for preparation of 300-710 exam?
Examforsure is totally committed to provide you Cisco 300-710 practice exam questions with answers with make motivate your confidence level while been at exam. If you want to get our question material, you need to sign up Examforsure, as there are tons of our customers all over the world are achieving high grades by using our Cisco 300-710 exam dumps, so can you also get a 100% passing grades you desired as our terms and conditions also includes money back guarantee.
Key to solution Preparation materials for Cisco 300-710 Exam
Examforsure has been known for its best services till now for its final tuition basis providng Cisco 300-710 exam Questions and answer PDF as we are always updated with accurate review exam assessments, which are updated and reviewed by our production team experts punctually. Provided study materials by Examforsure are verified from various well developed administration intellectuals and qualified individuals who had focused on Cisco 300-710 exam question and answer sections for you to benefit and get concept and pass the certification exam at best grades required for your career. Cisco 300-710 braindumps is the best way to prepare your exam in less time.
User Friendly & Easily Accessible
There are many user friendly platform providing Cisco exam braindumps. But Examforsure aims to provide latest accurate material without any useless scrolling, as we always want to provide you the most updated and helpful study material as value your time to help students getting best to study and pass the Cisco 300-710 Exams. you can get access to our questions and answers, which are available in PDF format right after the purchase available for you to download. Examforsure is also mobile friendly which gives the cut to study anywhere as long you have access to the internet as our team works on its best to provide you user-friendly interference on every devices assessed.
Providing 100% verified Cisco 300-710 (Securing Networks with Cisco Firepower (300-710 SNCF)) Study Guide
Cisco 300-710 questions and answers provided by us are reviewed through highly qualified Cisco professionals who had been with the field of Cisco from a long time mostly are lecturers and even Programmers are also part of this platforms, so you can forget about the stress of failing in your exam and use our Cisco 300-710-Securing Networks with Cisco Firepower (300-710 SNCF) question and answer PDF and start practicing your skill on it as passing Cisco 300-710 isn’t easy to go on so Examforsure is here to provide you solution for this stress and get you confident for your coming exam with success garneted at first attempt. Free downloadable demos are provided for you to check on before making the purchase of investment in yourself for your success as our Cisco 300-710 exam questions with detailed answers explanations will be delivered to you.
Cisco 300-710 Sample Questions
Question # 1A security engineer needs to configure a network discovery policy on a Cisco FMC appliance and prevent excessive network discovery events from overloading the FMC database? Which action must be taken to accomplish this task?
A. Change the network discovery method to TCP/SYN.
B. Configure NetFlow exporters for monitored networks.
C. Monitor only the default IPv4 and IPv6 network ranges.
D. Exclude load balancers and NAT devices in the policy.
Question # 2
Which action must be taken on the Cisco FMC when a packet bypass is configured in case the Snort engine is down or a packet takes too long to process?
A. Enable Inspect Local Router Traffic
B. Enable Automatic Application Bypass
C. Configure Fastpath rules to bypass inspection
D. Add a Bypass Threshold policy for failures
Question # 3
An engineer must deploy a Cisco FTD appliance via Cisco FMC to span a network segment to detect malware and threats. When setting the Cisco FTD interface mode, which sequence of actions meets this requirement?
A. Set to passive, and configure an access control policy with an intrusion policy and a file
policy defined
B. Set to passive, and configure an access control policy with a prefilter policy defined
C. Set to none, and configure an access control policy with a prefilter policy defined
D. Set to none, and configure an access control policy with an intrusion policy and a file policy defined
Question # 4
A security engineer is adding three Cisco FTD devices to a Cisco FMC. Two of the devices have successfully registered to the Cisco FMC. The device that is unable to register is located behind a router that translates all outbound traffic to the router's WAN IP address. Which two steps are required for this device to register to the Cisco FMC? (Choose two.)
A. Reconfigure the Cisco FMC lo use the device's private IP address instead of the WAN
address.
B. Configure a NAT ID on both the Cisco FMC and the device.
C. Add the port number being used for PAT on the router to the device's IP address in the Cisco FMC.
D. Reconfigure the Cisco FMC to use the device's hostname instead of IP address.
E. Remove the IP address defined for the device in the Cisco FMC.
Question # 5
A security engineer is adding three Cisco FTD devices to a Cisco FMC. Two of the devices have successfully registered to the Cisco FMC. The device that is unable to register is located behind a router that translates all outbound traffic to the router's WAN IP address. Which two steps are required for this device to register to the Cisco FMC? (Choose two.)
A. Reconfigure the Cisco FMC lo use the device's private IP address instead of the WAN address.
B. Configure a NAT ID on both the Cisco FMC and the device.
C. Add the port number being used for PAT on the router to the device's IP address in the Cisco FMC.
D. Reconfigure the Cisco FMC to use the device's hostname instead of IP address.
E. Remove the IP address defined for the device in the Cisco FMC.
Question # 6
An engineer is configuring multiple Cisco FTD appliances (or use in the network. Which rule must the engineer follow while defining interface objects in Cisco FMC for use with interfaces across multiple devices?
A. An interface cannot belong to a security zone and an interface group
B. Interface groups can contain multiple interface types
C. Interface groups can contain interfaces from many devices.
D. Two security zones can contain the same interface
Question # 7
An engineer needs to configure remote storage on Cisco FMC. Configuration backups must be available from a secure location on the network for disaster recovery. Reports need to back up to a shared location that auditors can access with their Active Directory logins. Which strategy must the engineer use to meet these objectives?
A. Use SMB for backups and NFS for reports.
B. Use NFS for both backups and reports.
C. Use SMB for both backups and reports.
D. Use SSH for backups and NFS for reports.
Question # 8
An engineer wants to perform a packet capture on the Cisco FTD to confirm that the host using IP address 192 168.100.100 has the MAC address of 0042 7734.103 to help troubleshoot a connectivity issue What is the correct tcpdump command syntax to ensure that the MAC address appears in the packet capture output?
A. -nm src 192.168.100.100
B. -ne src 192.168.100.100
C. -w capture.pcap -s 1518 host 192.168.100.100 mac
D. -w capture.pcap -s 1518 host 192.168.100.100 ether
Question # 9
A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address https:///capture/CAPI/pcap/test.pcap. an error 403: Forbidden is given instead of the PCAP file. Which action must the engineer take to resolve this issue?
A. Disable the HTTPS server and use HTTP instead.
B. Enable the HTTPS server for the device platform policy.
C. Disable the proxy setting on the browser.
D. Use the Cisco FTD IP address as the proxy server setting on the browser.
Question # 10
An engineer must configure a Cisco FMC dashboard in a multidomain deployment Which action must the engineer take to edit a report template from an ancestor domain?
A. Add it as a separate widget.
B. Copy it to the current domain
C. Assign themselves ownership of it
D. Change the document attributes.
Question # 11
An organization is installing a new Cisco FTD appliance in the network. An engineer is tasked with configuring access between two network segments within the same IP subnet. Which step is needed to accomplish this task?
A. Assign an IP address to the Bridge Virtual Interface.
B. Permit BPDU packets to prevent loops.
C. Specify a name for the bridge group.
D. Add a separate bridge group for each segment.
Question # 12
What must be implemented on Cisco Firepower to allow multiple logical devices on a single physical device to have access to external hosts?
A. Add at least two container instances from the same module.
B. Set up a cluster control link between all logical devices
C. Add one shared management interface on all logical devices.
D. Define VLAN subinterfaces for each logical device.
Question # 13
An engineer must configure the firewall to monitor traffic within a single subnet without increasing the hop count of that traffic. How would the engineer achieve this?
A. Configure Cisco Firepower as a transparent firewall
B. Set up Cisco Firepower as managed by Cisco FDM
C. Configure Cisco Firepower in FXOS monitor only mode.
D. Set up Cisco Firepower in intrusion prevention mode
Copyright © Examforsure. All rights reserved.